In data from sustained long-term, full-scale power plant testing, AS® HgX delivered up to 60 percent greater performance to meet the same EPA Mercury & Air Toxics Standards (MATS) than Novinda's first generation Amended Silicates® product – AS-022.
Award-winning green building technology from Japan is installed and operating in Escondido, CA providing high indoor air quality and energy saving. Geo-Power System utilizes natural temperature differences between underground and outside air. The underground temperature below 16ft stays very consistent all year around at the average annual temperature of the location. During summer time, outside hot air passes through vertically buried Geo-Pipe, which acts as a 24ft long high efficiency heat exchange device, to cool the air before being sent inside buildings. During winter time, the heat exchanger works in reverse, as cold outside air is warmed.
The plant, measuring a little over 1,600 square feet (about the size of a large garage) not only treats municipal wastewater to regulated requirements, it also removes pharmaceuticals and personal care products present in wastewater to below detectable levels.
"Finally we've adapted the efficient disinfection capabilities of large-scale UV purification systems for points of use in homes, offices, and hospitals," said Joerg Blechschmidt, Business Development Manager at SCHOTT. "SCHOTT's plug-and-play modules fit low flow-rate applications to ensure the cleanliness of water. In addition, SCHOTT can customize its compact UV module to specification in order to meet performance requirements for any application."
Lucid Energy, a provider of renewable energy systems that enable industrial, municipal and agricultural facilities to produce clean, reliable, low-cost electricity from their gravity-fed water pipelines and effluent streams announced that the LucidPipe 42-inch and 24-inch in-conduit hydroelectric turbinesturbines were tested and certified by NSF International to NSF/ANSI Standard 61 and are now approved for installation in potable water systems. The turbines, which operate inside of large-diameter pipelines, spin as fast-moving water passes through them, producing a consistent, environmentally-friendly and non-weather-dependent source of renewable energy.
With the release of ArchiCAD 16, GRAPHISOFT has once again provided the tools and technology needed to support sustainable design, from the earliest concept phase of any project. The built-in Energy Evaluation functionality of ArchiCAD 16 gives architects an innovative way to create "green" BIM and perform reliable dynamic energy evaluation within ArchiCAD. The technology relies on BIM geometry analysis and accurate, hour-by-hour online weather data.
"The Windstrument™ looks very different from the typical turbines that everyone is used to seeing and this design difference solves problems inherent with traditional turbines," said Dunham. The Windstrument™ blade design is a conical helicoid pattern found extensively in nature - hurricanes, tornadoes, galaxies, animals and plants. These natural dynamics allow for bird safe, human safe continuous power generation at lower heights and in structurally busy urban environments.
Baumer's LBFS level switch is a reliable alternative to widely used vibratory level switches. The LBFS sensor can also detect the levels of viscous or dry materials and can be fitted on tanks or pipes in any desired position. The sensor is insensitive to flow, turbulence, bubbles or foaming, and suspended solids. The level switch is able to detect media levels in tanks, vessels and pipes. It can also be used for overflow prevention, pump protection against dry running, and media separation with oil/water mixtures. It is suitable for an extremely broad range of application areas, including domestic water, wastewater, HVAC filters, hydraulic systems, oil and gas, bio-energy, wood pellets, grain mills, rail transport and pump systems.
The Netbiter® remote management solution enables users to monitor and control machinery such as power generators, tanks, wind turbines, building applications and base stations from a standard web browser.
"The Sun Simba's ultra-thin profile enabled us to take an entirely different approach to tracking," said Asif Ansari, Morgan Solar's CEO. "If the target is grid-parity without subsidies, it is simply not enough for system providers to reduce the cost of solar panels and declare victory. Bringing down the balance of system, installation, and development costs – which now represent a significant portion of PV and CPV installed costs – is critical
Three environmental innovation projects demonstrate the capacity of Latin American researchers to develop solid virtuous circles. A method to revolutionize gold mining; biofuel from used cooking oil; a container where garbage and wastewater go in and four useful products and zero waste come out: Latin American science applied to the environment.
Breaking the traditional barriers to residential solar adoption – complexity, affordability and aesthetics – this technology offers the missing link needed by the energy industry to drive solar adoption across the U.S., and will bring the possibility of safe and reliable solar power to American households.
AssayNet's flagship product is a client/server LIMS built specifically for environmental and minerals laboratories. Robust and highly scaleable, the program was written to conform to the ASTM level II specification for LIMS. LIMS2010 an ideal choice for multi-national companies operating in foreign countries since the program is fully bilingual in English and Spanish, and the two languages can run in parallel, using the same data, in one location.
Historically, the main drawback of many conventional photovoltaic systems has been the high initial cost as well as the limited amount of electrical output when compared to the solar input. This Volther hybrid solar collector system allows excess heat to be recaptured and boosts the system's return on investment, according to Solimpeks Corp.
"ClearSCADA 2010 addresses customer challenges of managing geographically dispersed remote assets in water and oil and gas sectors," says Eric Schwantler, ClearSCADA Product Director. "Customers are demanding reduced operational costs, improved information gathering from remote assets, and tightened security. This powerful tool ties together our Sensor to Enterprise solution and provides enhanced component integration with existing products."
Designed by AdEdge specifically for well head treatment, AD26 systems are engineered as stand alone systems for the removal of iron, manganese, sulfide, and arsenic if it coexists with high levels of iron.
